- ページ 8
ヒーター 2VV VENESSE Comfort VCV-B-25EのPDF 操作およびメンテナンスマニュアルをオンラインで閲覧またはダウンロードできます。2VV VENESSE Comfort VCV-B-25E 14 ページ。 Operation and maintenance
2VV VENESSE Comfort VCV-B-25E にも： マニュアル (10 ページ)
ページを印刷する2. CONTROLS
2.6 OPERATING LINKED AIR CURTAINS
Comfort
When VENESSE
is connected to the air curtain selected as "MASTER". The other air curtains in the chain operate
in the mode set from that control panel as a "SLAVE".
1.
MASTER
8 A
15/16 17/18
DK
SH
DK=Door Switch; SH=Time switch.
2.6-1 External components of
chained air curtains
Door switch DK
•
Can be individually connected to each air cur-
tain
•
Each air curtain responds to its own contact
•
The
DOOR LED will light up on the control pa-
nel only when all doors are closed
•
If the user wants to change the fan speed or
heater output, this will only be possible when
the doors are open.
Timer switch SH
•
The timer switch is connected to the master
air curtain
•
Settings are made using the time switch.
•
The time switch controls all chained air
curtains.
8
air curtains are linked, they are operated from a one control panel that
SLAVE
8 A
15/16 17/18
KABEL-05M
KABEL-05M
2.
MASTER
SLAVE
KABEL-05M
DK
2.6-2 Cleaning Interval - CLEAN
The CLEAN signal will be triggered by the
air curtain that reaches its cleaning deadline
first. The
LED goes on to signal the clea-
ning interval. The cleaning interval signal for
the air curtains can be reset by pressing the
buttons on the control panel at the same
time. It can also be reset before the cleaning
interval has been signalled, e.g., if the air curtain
is cleaned before its signal time.
Reset applies to all chained air curtains.
1
2
. . . 6.
MASTER
SLAVE
8 A
15/16 17/18
DK
5s
3