- ページ 15

CDプレーヤー AVM inspiration C6mのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AVM inspiration C6m 16 ページ。

6. Cleaning

Use a soft cloth and normal glass cleansing fluid.

CAUTION: Make sure that no fluid comes into the unit. Do not use scouring cleaners. They may

damage the surface.

Some putative defects are often caused by mistakes in operation. Sometimes other units connected to the

amplifier can cause problems. Therefore please read the following tips before You consult Your dealer or us.

1. Amplifier is muted

a) Mute function is active, press button MUTE (vol/pol>) on remote control or increase volume using the

rotary encoder (14)

b) MONITOR function is activated. Switch monitor off.

c) PROCESSOR function is activated. Switch processor off.

d) Inadvertent switching to standby by remote control. Press power button (1). If the LED indicator and

display do not light up a fuse can be blown due to overvoltage (thunderstorm). Please contact Your

dealer.

2. Amplifier switches off during normal operation

This can happen if the temperature inside the unit becomes too high. In this case the amplifier switches off

and the display shows "overheat". Switch the unit off and let it cool down for five minutes.

If the Display shows "overload" please check if there is a short circuit in the speaker cables. Switch the unit

off by pressing power button (1) remove the short circuit and switch again on.

3. Hum

a) Hum while playing records: Make sure that the chassis of Your record player is properly grounded.

4. Infrared remote control doesn't work

a) Check the batteries of Your remote control transmitter

b) Point with the remote control transmitter directly to the unit.