- ページ 6
カーアラーム AvMap PIN4iのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AvMap PIN4i 8 ページ。 Tis immobilizer
ページを印刷するB. Device key is lost
4.2 Q&A
Q: How to replace a depleted battery?
A: Purchase a new battery, the same or which meets the same specifications as mentioned in
''Technical specifications'' section and replace it by following the next steps:
1. Push and hold pushed upper key case in the indicated location
2. Slide upper key case in the indicated direction
A2. Device key is in sleep
mode
A3. Device key is not in
the vehicle anymore
while engine is ON. If the
key has left the vehicle
with a passenger, then it
will not be possible to
start the engine
2
7. Proceed with engine start operation
8. Exchange device key battery before the next drive
9. Shake key for 5 seconds
10. Press start stop button once, without brake pedal
pushed
11. Wait 5 seconds
12. Proceed with engine start operation
13. Contact customer support (contacts avaiable
at: support.avmap.it/tis-immobilizer) to force
disarming of the device, even in the absence of
the key. This emergency countermeasure will let
you start the engine in order to fix situation.
NOTICE
Vehicle must be located in an area with GSM
reception and in Accessory ON mode (push start
stop button without pressing the brake pedal)
before disarming command is sent to the device.
If there is no GSM reception, disabling function will
not work (i.e.: underground parking)
14. Contact customer support (contacts avaiable
at: support.avmap.it/tis-immobilizer) to force
disarming of the device, even in the absence of
the key. This emergency countermeasure will let
you start the engine in order to fix situation.
NOTICE
Vehicle must be located in an area with GSM
reception and in Accessory ON mode (push start
stop button without pressing the brake pedal)
before disarming command is sent to the device.
If there is no GSM reception, disabling function
will not work (i.e.: underground parking)
15. Contact customer support to receive information
for purchasing a new key
1