- ページ 9

トースター A.J.Antunes CTX-200LのPDF 設備マニュアルをオンラインで閲覧またはダウンロードできます。A.J.Antunes CTX-200L 20 ページ。 Club toaster
A.J.Antunes CTX-200L にも：マニュアル (20 ページ)

ページを印刷する

1. Troubleshooting

Purging Products from the toaster

During normal operation, if it ever becomes necessary

to purge a product from the toaster, follow these steps:

1. While in Ready or Wait mode, press and hold the

NeXt button until the product have been purged

from the unit. This will speeds the unit up, forcing

the product out of the toaster.

2. Once the product is purged, release the NeXt

button and the unit will return to normal operating

speed.

Note: Product is always purged out of the front of

the toaster using the NeXt button. It is Not pos-

sible to purge product backwards through the unit.

only the NeXt button will purge product.

shutting down the CtX-200l

Follow these steps to shut down the toaster:

1. Turn the power off.

2. The fans continue to run and the display reads:

OK to Clean

45 minutes Remaining

3. The Cool Down mode will continue for 45 min-

utes, counted down on the display, and the unit

will shut down automatically when complete.

Note: If the unit requires any internal maintenance,

be sure to completely shut down the unit.

IMPortaNt

do Not unplug the power cord when the unit is

in cool down mode. Wait for the 45-minute cool

down period to complete before unplugging the

power cord.

WarNING

to avoid possible personal injury and/or dam-

age to the unit, all inspections, tests, and repair

of electrical equipment should be performed

by QualIfIed serVICe PersoNNel. the unit

Must be completely shut down and unplugged

before performing any internal service, except

when electrical tests are required. use extreme

care during electrical circuit tests. live circuits

will be exposed.

P/N 1011038 06/09

McDonald's

oPeratIoN (continued)

reset to factory defaults

Inadvertent changes to the settings of the CTX-200L

could affect how the unit operates. If a fault message

appears, it is recommended that you first attempt to

restore the settings to the factory defaults. This will

restore all settings and parameters to McDonald's

corporate specifications.

Note: the CtX-200l should Not be unplugged

during normal operation or during the 45-minute

cool down period.

Follow these steps to reset the Factory Defaults:

1. Turn the power off.

2. Turn the power on.

3. Listen for the unit to click three times, then imme-

Note: the display will then go blank.

4. Turn the power off and then back on.

5. Wait for the 20-second countdown to complete.

Note: the unit will then display Muffin Wait.

6. Preheat the unit and test for proper operation.

Note: If after resetting the factory defaults the

unit continues to display a fault/error message, turn

the power off and unplug the power cord. Wait a

few seconds and then plug the power cord back in.

then repeat steps 2 through 6. If the unit still dis-

plays a fault/error message, immediately call your

authorized service agency for assistance.

Changing the display language

Follow these steps to change the display language

between English and French:

1. At any time during power off (but connected to

2. Press the NeXt button to select the desired

3. After 3 seconds, the change is stored into

Club ToasTer CTX-200l

diately press and hold the PreV and NeXt but-

tons until the display reads Factory Defaults

Set.

power), cool down, warm-up, or normal operation,

press the seleCt button.

language and then release the button.

memory.