- ページ 7

リフティングシステム aqua greek products ANCHOR F-808SAのPDF マニュアルをオンラインで閲覧またはダウンロードできます。aqua greek products ANCHOR F-808SA 13 ページ。

SAW-CUT RETRO FIT/NEW CONSTRUCTION

CATALOG NO. F-808SA-10

1. INSTALL REBAR IN THE SECTION OF THE DECK THAT WILL BE THICKENED TO 10".

SEE SAW-CUT RETRO-FIT/NEW CONSTRUCTION FOR YOUR SPECIFIC LIFT.

2. SET THE STAINLESS STEEL ANCHOR SLEEVE IN PLACE. MAKE SURE THE CENTER OF

THE ANCHOR SLEEVE IS NO MORE THAN 44" FROM THE POOL'S EDGE. SET THE FIXING

ANCHOR INSERT 3 1/2" FROM THE CENTER OF THE ANCHOR SLEEVE. FIXING ANCHOR

MAY BE LOCATED ANYWHERE ON THE DECK, AS LONG AS IT IS 3 1/2" FROM THE

CENTER OF THE ANCHOR SLEEVE.

3. BOND THE ANCHOR SLEEVE ACCORDING TO YOUR LOCAL CODE REQUIREMENTS BY

USING THE BONDING LUG AND BONDING SCREW ON THE BOTTOM OF THE ANCHOR

SLEEVE.

4. POUR YOUR CONCRETE AND FINISH THE POOL DECK SURFACE.

5. ONCE THE CONCRETE HAS CURED, YOUR LIFT IS READY TO BE MOUNTED INTO THE

ANCHOR SLEEVE.

7/12/2022 11:05:06 AM PAGE - 7