- ページ 17

ダイビング機器 Aqua Lung EB001003のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aqua Lung EB001003 20 ページ。 Survival egress air

INSPECTION AND SERVICE

1. It cannot be assumed that SEA is in good working order on the basis that it has

received little use since it was last serviced. Remember that prolonged or improper

storage can still result in internal corrosion and/or deterioration of o-ring seals and

valve springs.

2. It is imperative that manufacturer prescribed service on SEA is performed by a

manufacturer trained service technician according to the procedures outlined in our

Technical Manual once every two years under normal prescribed use OR once a year if

operating in an environment where harsh / heavy / in-water or training use may exist.

Manufacturer prescribed service consists of:

•

Complete overhaul of the first and second stage regulator.

•

Visual inspection of the cylinder in accordance with local regulatory

requirements.

•

Verification of current hydrostatic test date on cylinder. Re-test of cylinder

in accordance with local regulatory requirements.

•

Verification of cylinder end of life date. Cylinder must be replaced upon

expiration of this date.

3. DO NOT attempt to perform any disassembly or service to SEA. Doing so

may cause SEA to dangerously malfunction. All service must be performed by a

manufacturer trained service technician.