ページを印刷する十字螺丝刀 Phillips screwdriver
一字螺丝刀（0 号，刀头宽度为 3mm）#0, 3mm Slotted screwdriver
3)
外壳说明 Description of the Case
外壳为椴木板激光切割而成，因此其一面会有烧灼的痕迹，这是正常现象，安装时将其用于
内部即可。
The case is made of l aser-cut basswood plywood. Thus, there might be some laser-burnt marks. It's
normal. Just hide the burnt marks when assembling.
4)
蓝丁胶的使用 How to use the blue tack
蓝丁胶是一种压敏型胶粘材料，能反复使用，环保无害。
Blu-tack is a reusable putty-like pressure-sensitive adhesive. Also, it's harmless and
environment-friendly.
粘贴方法如下：How to paste with Blu-tack
通过拉扯揉捏，使其充分软化，变得粘手
Pull & twist the Blu-tack to make it soft and sticky
取适量揉成小球，在制作气象站时揉成 3-4mm 左右的小球即可
Roll it into balls with 3-4mm in diameter
将 3 到 4 个小球放在粘贴物的表面，然后平均用力将其粘贴到被粘物上
Place 3 or 4 Blu-tack balls on one object and then stick it to another object
取下方法是：用手指采取搓揉、卷曲的方式将"蓝丁"取下。
How to remove the Blu-tack: rub & roll it
DFRobot 版权所有
Copyright © DFRobot. All rights reserved.CC BY-NC 3.0
CNP a g e
| 5