- ページ 4

コントローラー Aqua Lung CalypsoのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Aqua Lung Calypso 19 ページ。 Second stage
Aqua Lung Calypso にも：テクニカル・ニュース (4 ページ), ユーザーマニュアル (20 ページ), メンテナンス・マニュアル (20 ページ)

The acronyms used:

LP: Low Pressure

MP: Medium Pressure

HP: High Pressure

Numbers in brackets indicate the part number of the

component shown on the exploded view attached.

DISASSEMBLY PROCEDURE

Note: Before commencing disassembly, consult

the exploded view to check the reference

numbers of all parts requiring replacement.

These parts should all be replaced by new parts

and should not be re-used on the pretext that

the regulator has seen little use since its

manufacture or since its last service.

Attention: Use only the special tool when

removing O-rings in order to avoid damaging the

seal recess. The slightest scratch on a sealing

surface could cause a leak. If a surface should be

damaged then this part should be replaced with a

new one. Do not use any pointed instrument or

metal tool to remove O-rings.

Service manual Calypso second stage

Use a 11/16'' spanner and a 19mm spanner, block the

nut (22) and unscrew the end nut on the hose. Remove

the O-ring from the hose nipple.

damage the O-ring groove. Remove the O-ring from the

hose threaded end

2. Slide back the hose

protectors and check that

there are no signs of

impact and that the

crimped ends are in good

condition and that they

firmly grip the hose. If

not, it should be

replaced.

4. Remove the cover, starting from the venturi knob side.

5. Remove the diaphragm (9) with its washer (10).

Take care not to

3. Remove the

mouthpiece strap (2),

by lifting the cam with

your thumb.

Remove the

mouthpiece (3).