- ページ 4
見る Avocet VERTECH II ALPINのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Avocet VERTECH II ALPIN 6 ページ。
ページを印刷するACCUMULATING ALTITUDE.
Ft
There are 2 altitude accumulators that
record together, and reset separately. The
RUNS
first one is called Daily Vertical Feet (B1)
Ft /min
and is normally reset after a day's activity.
The second one, Total Vertical Feet, (B2) is
B1
normally used to keep a long-term record
over a month, season, or year.
Accumulation can be switched on or off by pressing the Start/Stop
Button when either accumulator is displayed. The arrow at the left
of the display blinks when the accumulator is on. Remember to
turn the accumulators on before beginning your activity and off
when you finish; otherwise you will record no vertical feet or will
record unwanted vertical feet. Both accumulators record up to 299,
995 vertical feet with 5 feet resolution.
Ft
START/STOP
RUNS
BUTTON
Ft /min
STARTS & STOPS
ACCUMULATION
Turn altitude accumulation on or off in the Daily Vertical or Total Vertical
Feet function with the Start/Stop button. The arrow blinks when vertical
feet are being accumulated.
CHANGING THE DIRECTION OF ACCUMULATION.
Skiers normally accumulate descent, and hikers and climbers, accu-
mulate ascent. To choose the direction of accumulation, press the
Adjust Button when Daily Vertical Feet is displayed. When Vertical
Feet is blinking, press the Option Button to change the direction.
The down-arrow will switch to an up-arrow or vice versa.
Ft
RUNS
OPTION BUTTON
SELECTS DIRECTION
Ft /min
OF ACCUMULATION
To change the direction of accumulation press the Adjust Button in the
Daily Vertical Feet function. Then, when the accumulated altitude is blink-
ing, press the Option Button and the arrow will change direction.
VERTICAL SPORTS FUNCTIONS
CHANGING THE MODE BETWEEN SKI AND HIKE.
Changing the mode has two effects. It switches the vertical rates
between feet per minute and feet per hour, and it activates the run
counter in the ski mode (feet per minute). To switch the mode go
to the Daily Vertical Feet function. Press the Adjust Button, then
press the Function Button twice. A blinking "S" or "H" will appear.
Press the Start/Stop Button to change the mode.
START/STOP BUTT
Ft
In Ski Mode rates display in feet per minute and Ski Runs are counted. In
Hike mode rates display in feet per hour and Ski Runs is turned off.
Ft
COUNTING SKI RUNS.
Ft
Mode the middle display (B1, B2, & B3)
RUNS
shows the number of runs skied. A run is
TOTAL
RUNS
MX
Ft /min
added after an altitude gain of 150 feet or
Ft /min
more is followed by a 150 foot loss.
B2
RESETTING ACCUMULATED VERTICAL, RUNS, MAX
RATE.
You can reset Daily Vertical Feet, Total Vertical Feet, Runs Skied,
and Maximum Vertical Rate. Press the Adjust Button when you are in
the function you want to reset, then press the Start/Stop Button to
reset the blinking display. Use the Function Button to move from one
display to another. When the Vertical Rate Timer is displayed, pressing
the Adjust Button resets the timer and the rate. Runs are only shown in
all "Ski" Vertical Sports functions, but can only be reset in the Daily
Vertical Feet function.
Ft
Ft
RUNS
ADJUST BUTTON
RUNS
Ft /min
Ft /min
ACCUMULATED
To reset, first press the Adjust Button in the function you want to reset. Then
press the Start/Stop Button to reset the blinking display.
OP BUTTON
CHOOSES SKI OR
CHOOSES SKI OR
Ft
HIKE MODE
HIKE MODE
In the Ski
Ft
RUNS
RESETS
Ft /min
VERTICAL
VERTICAL RATE FUNCTIONS.
Ski mode Current Vertical Rate (B1) per
minute is calculated from a moving aver-
RUNS
AV
age weighted toward the most recent
Ft /min
data. In Hike mode the Current Vertical
Rate per hour comes from a moving av-
B3
erage weighted toward the most recent
data. Resolution is 50 feet per minute in
ski mode or 100 feet per hour in hike mode.
Maximum Vertical Rate (B2) records the maximum rate attained in
the direction the Vertech is set to accumulate; that is, if it is set to
accumulate descent, maximum rate of descent will be recorded.
The Average Vertical Rate (B3) is calculated over the period that
the Vertical Rate Timer is running. The Timer and the Rate start and
reset together. Resolution is 1 foot per minute in Ski mode or 1
foot per hour in hike mode.
SLEEP.
The Vertech can be put into power-saving sleep mode if it
will be unused for several months. To enter Sleep, hold the Adjust
Button 10 seconds in the Daily Vertical Feet function. When "SLEEP"
appears, release the button immediately. If you fail to reach sleep
because you did not release the button quickly enough, return to
the Daily Vertical Feet function to try again. Accumulated vertical
feet are retained in sleep mode, but setup information is lost. Press
any button to exit Sleep.
POINTS TO REMEMBER
1. Don't forget to turn the altitude accumulators on and off. If you
don't turn them on, you won't record your vertical. If you don't
turn them off when you finish, you will accumulate unwanted verti-
cal while traveling to and from your activity.
2. Set up your Vertech to match your activity. Decide whether you
want to accumulate ascent or descent and whether you want rates
displayed in feet per minute (Ski mode) or feet per hour (Hike mode).
3. Ski runs are only recorded when the Vertech is in "Ski" mode.
4. When you switch between Ski and Hike modes, vertical rates are
reset, but accumulated vertical feet are retained.
In