- ページ 14

モニター AVOCOR AVF-8650のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。AVOCOR AVF-8650 20 ページ。

ページを印刷する
AVOCOR AVF-8650 クイック・スタート・マニュアル
Enabling the Touch Screen
Before setting up your display to support touch screen capability, ensure that:
The touch screen controller host computer is turned off.
•
The display is turned on.
•
The video output from the computer is connected to a video input on the display.
•
Connecting the Display to a Host Computer
1.
Connect the signal cable to the display, and then turn on the display.
2.
Connect the USB Cable (USB Type-B) to the display.
3.
Connect the other end of USB cable (USB Type-A) to the USB port on the laptop/ PC.
See picture below.
4.
Then turn on the computer.
5.
When USB cable is fully connected, wait for 5 seconds and the touch function is
ready. It can be activated by using the stylus or finger.
v.30_05_2018
14