ページを印刷する
Use and Care Manual
Wellness for Home
Step 8: Install side panels
1) Remove side panel cover E by slightly pulling the cloth strip (which could be thrown away
after use) from inner side panel.
2) Connect air tube(H) and USB line(I)from arm panel to the air tube(G) and USB line(J) at the
side of seat base. Carefully route the air hose and USB line through the frame and securely
attach so that it won't get pinched during the assembly of the arms.
Remark:only right panel have the USB line.
3) Use four screw bolts to fix the side panel onto the seat base.
4) Attach the side panel cover (E) to the side panel.
5) Repeat above steps to assemble the other side.
I
J
I
Step 9:
Take the remote control holder out from the remote control box. Fix it onto the left side panel.
Then put the remote control onto the holder.
Step 10:
Connect the remote controller wire and power supply, and then turn on the power switch.
12/13