- ページ 2

体重計 Bilanciai DD700のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Bilanciai DD700 5 ページ。 Weighing terminal

TROUBLESHOOTING

If the suggested remedy does not solve the problem, contact Assistance Service.

7.1

Malfunctions

PROBLEM

The terminal

does not switch on

The display backlighting is on,

but no data are displayed

USE AND MAINTENANCE MANUAL

CAUSE

No power

Adjust contrast (set to minimum)

Zeroing off-range on powering

REMEDY

Check that power arrives at

the mains outlet socket.

Check that the mains lead is

correctly plugged in.

Par. 3.2.2

Switch on the terminal while

holding pressed

After a few seconds, the

display will show the "CB" logo

with the contrast set to

maximum, after which the

contrast will gradually be

reduced.

Release

and then press it

again to set the contrast at the

required level.

Switch off the terminal, unload

the scale then power the terminal

again.