- ページ 5

コントローラー Aqua Medic T Controller HCのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Aqua Medic T Controller HC 9 ページ。 Digital measuring and regulating unit to control a heating device
Aqua Medic T Controller HC にも：操作マニュアル (13 ページ)

ページを印刷する

1. Product Description

The AB Aqua Medic Temperature Controller HC is generally delivered with a sea-water resistant

temperature sensor. The unit is ready for connection. The heating device can be connected to the

main plug.

2. Heaters

Heaters of any type (i. e. glass or metal aquarium heaters, low voltage heating cables with

transformer, warm water supply by a magnetic valve) can be controlled with this Temperature

Controller. The maximum output amounts to approx. 1.000 Watt.

3. Description of the front panel

1. Display

2. Light „User On"

3. Measurement adjustment switch

4. Set-knob for adjustment

5. Temperature sensor

6. Power plug

4. Installation

1. Connect to 220 V power source.

2. Set switch (2) to „T" (display of temperature).

3. Place the temperature sensor into the aquarium and fix it with an AB Aqua Medic electrode

holder. After a few minutes, the actual temperature of the aquarium water is indicated.

5. Adjusting the nominal values

A. Put switch (2) to „Set" (to adjust the desired value).

B. To change the value, use the „Set" knob (1).

C. Set switch (2) back to „T".

The unit is now ready for use. As soon as the temperature value falls below the adjusted value, the

unit activates the power plug (4) and switches the user (heater) on.