- ページ 9

スイッチ Avolites Titan NetのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avolites Titan Net 15 ページ。

The PoE can supply a maximum of 46W across all the ports.

Right: Link status. Light flashes when data is passing.

Off

Yellow

Green

Near the Micro-USB connector is an indicator LED to show the status of the optical link.

This has the same indications as the etherCON link status LED.

7. SETTING OPTIONS

To enter the menu system to set options, press the Menu button.

Use the Up/Down arrows to choose the desired menu option.

Press OK to modify the selected menu option.

To exit the menu system press the Menu button again.

7.1

Set IP1?(IP2=auto)

ADDR 010.000.000.100

MASK 255.000.000.000

GATE 010.255.255.254

This option sets the IP address of the network switch (IP1). The control panel also has

an IP address which will automatically be set one address above IP1. You might need to

change these if they conflict with something existing on your network.

7.2

You can save one user-defined configuration, and switch between that and the default

configuration.

Save/Load Config?

no connection

10/100Mb connection

1Gb connection

Setting options - Page 9

Titan Network Switch v1a.doc 29 March 2022