- ページ 8

ペットケア製品 Aqua Medic SP 3000 NiveaumatのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Aqua Medic SP 3000 Niveaumat 18 ページ。

ページを印刷する

1. Features

In every aquarium, water evaporates and has to be refilled regularly. Especially in salt water

aquariums, it is important to automize the refilling to avoid oscillations of the salt concentration.

The Niveaumat is a peristaltic pump with a connected level sensor. Liquid is transported by

repeatedly kneading the pump hose. It can be used wherever small amounts of liquid have to be

pumped.

The dosing pump is supplied with a long-lasting synchronous motor and the pump hose is made of

Santoprene®, a specially developed material resistant to many chemicals and with a very long life

– typically in excess of 3 million compressions.

The synchronous motor operates with a fixed speed and cannot be regulated.

Important note:

- The pump must be operated at the correct voltage (see type label).

2. Delivery

The Niveaumat comprises the following parts (Fig. 1):

peristaltic pump (2), with level sensor (4)

holding plate for level sensor (4)

power supply for pump (12 V~, 10 watts) (7)

2.5 m transparent pvc hose (air hose, 6/4 mm, ¼")

suction fitting (5) with non-return valve (6)

water inlet with drip counter and holding plate (8)

spare hose for the pump

3. Technical Data

Type

Power supply:

Safety voltage of the pump:

Power consumption:

Maximum flow:

Connections:

Motor:

Speed:

Motor life:

Pump hose life:

Continuous running possible:

4. Installation

The pump may only be operated in the dry, it is not designed for submersed use. It should be

securely mounted using the keyhole slots provided in a dry place.

The pump is self-priming and should be mounted above the water level of the liquid storage

tank (see Fig. 1).

The outlet should always be positioned above the aquarium or sump. If the pump stops with

the drive axle in the horizontal position then the pump will not act as a non-return valve. The

air gap between the outlet hose and water prevents aquarium water being syphoned back into

the liquid storage tank (see Fig. 1).

The non-return valve (6) must be placed in the inlet fitting (5) of the pump. This prevents the

pressure tube emptying and ensures that the same volume is dosed during each operating

cycle (see Fig. 1).

Niveaumat

230 V / 50 Hz

12 V ~

4.5 watts

3 litres/hour - 50 ml/min – 0.8 gph

6/4 mm hose (¼")

synchronous

20 rpm

>10,000 hrs

>3 Million turns

Yes