ビデオカメラ Avon SiのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Avon Si 2 ページ。 Si mini camcorder quick-start guide
ページを印刷するSI Mini Camcorder
Quick-Start
Guide
CHARGING THE
BATTERY—IMPORTANT!! Camcorder must be
fully charged before fi rst use. The power switch must be turned
to the ON position in order to charge the battery. First charge
may take a minimum of 4 hours. For most effi cient charging,
set to Menu Mode. See page 4 of User Manual for instructions.
POWER
1. To turn ON camcorder, slide ON/OFF switch upward.
To turn OFF, press and hold the OK button to save
settings. Then slide the switch to OFF position.
2. If camcorder is inactive, screen will go dark.
Press and hold OK button to illuminate screen.
3. When you fi rst turn power on, camcorder will be on
Camcorder Mode as default. Press the UP or DOWN buttons
to switch between DV (video) and DSC (camera) modes.
To expand camcorder's memory to increase amount of photos
and length of videos, use a T-Flash Micro SD card, which can
be purchased at mass retail stores. See page 8 of User Manual.
CAMCORDER (DV) MEDIA PLAYER MODE
To record a video:
Press the CAMERA button to start
recording. Press CAMERA button again to stop the recording.
The recorded video fi le will be saved automatically.
To set the video quality:
• Press the VOL button on the bottom side of the camcorder.
The DV setting menu will show on the screen.
• To adjust video quality, use UP and DOWN buttons
to move to Capture size. Select the video resolution
you wish to record.
To play the recorded video:
to enter the Media Main Menu.
• Use UP and DOWN buttons to move to VIDEO ICON.
Press OK to enter video playback mode.
• Select the recorded video clip you would like to watch.
Press OK to start video playback.
THE SHARPER IMAGE
®
name and logo are registered trademarks. Manufactured and Marketed by Avon under license.
Press the MENU button
Innovative technology from
The Sharper Image
DV/DSC on-screen indicator
VIDEO function
for playback
©
The Sharper Image. All Rights Reserved.
®
Slide ON/OFF
switch
Press and hold
OK button to
illuminate screen
Press UP button
to move
to DSC mode
from DC mode
Press DOWN
button to move
to DC mode
from DSC mode
Top View
Camera button
Media Menu Mode
Press UP button
to move forward
to next function
Press DOWN button
to move backward
to last function
Press OK button
to enter selected
function mode
Bottom View
Press VOL button
to set DV or DSC