- ページ 8
IPカメラ Avonic CM60-IP-BOXのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Avonic CM60-IP-BOX 16 ページ。 Integration hd color box camera
ページを印刷する6. Frame rate
User can specify the size of the frame
rate, generally, the frame rate greater,
the image more smooth; Frame rate is
smaller, the more you'll have the sense
of a stuttering image.
7. I key frame interval:
Set interval between 2 I frame, the
bigger interval is, the response will be
lower from viewing window.
8. Bit Rate control
Code stream control way:
Constant bit rate: video coder will be
coding according to preset speed
Variable bit rate: video coder will adjust
the speed based on preset speed to
gain the best image quality.
9. Fluctuate level
Restrain the fluctuation magnitude of
variable rate, grade 1 ~ 6
System Setting
1. Work Mode
Work Mode RTSP
2. Reboot
Click the "Reboot" button, system
restart.
3. User and password
The user can modify the password
(letters and Numbers only)
4. Apply / Cancel
Modify password and click the "apply"
button to the login page, press "cancel"
button to cancel password change.
www.avonic.eu
Network Setting
1. Lan Settings
Default the IP address is
192.168.100.99, The MAC address can
be modified.
2. Port Settings
a. HTTP Port IP address identifies the
network device, the device can run
multiple web applications, each
network program using network port
to transmit data, so data transmission
to be carried out between the port and
port. Port setting is to set up WEB
SERVER program using which port to
transmit. When port mapping, need to
be consistent with the port
number(default port: 80)
b. RTSP Port Network camera support
RTSP protocol, use the VLC tools
broadcast.
c. PTZ Port Support PTZ protocol,
default port: 5678.
3. Control Protocol Setting
Setting camera control communication
protocol, include Visca address, Pelco-
D address, Pelco-P address.
4. RTMP Setting
Setting the camera stream, can set up
two stream, in the two stream selection
control code stream of "On", "Off",
"Video", "Audio", etc.
5. RTSP Setting
Setting network camera RTSP protocol
of "On", "Off".
6. ONVIF Setting
Setting the ONVIF protocol and ONVIF
authorization "On", "Off".
7. Multicast Setting
Setting multicast "On", "Off", and
multicast address(default address
8