- ページ 4
アクセサリー CP Electronics EBDHS-MB-DNET1のPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。CP Electronics EBDHS-MB-DNET1 8 ページ。 Luminaire mount high bay pir dali network
ページを印刷するInstallation
Do not grip unit at the lens end. Hold the square body near the threaded end when installing and tightening the
nut. Care must be taken to prevent damage to the lens and surrounding IP seal.
Components
Part
IP Spacer with silicone coating 1
Silicone washer
5º washer
5º spacer
M20 nut
Standard luminaire fitting
IP luminaire fitting
Note. Use the 5º spacers
where the luminaire
housing has a draft angle.
4
Quantity
Supplied
1
1
1
1
Important
Ensure that the silicone washer and/or the IP spacer are used to maintain IP rating.
Mounting hole without key
Mounting hole with key
Note. Key to be at top of
sensor.