- ページ 6

ペットケア製品 Aqua One Ocellaris 400のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aqua One Ocellaris 400 13 ページ。 Aquarium canister filter

Starting Your Filter

Method 1

1. The primer for your canister filter is located at the

top of the head unit. Open the primer by unscrewng

the cap. Fill the canister using water siphoned from

the aquarium or use a clean water jug (add water

conditioner if using tap water). Fill the canister slowly

as it may be difficult to judge when the filter is full. Once

the canister is full, replace the cap.

2. Now the canister filter is ready to be plugged in.

3. Due to the volume of water in the canister filter, it

may be necessary to top up the water in the aquarium,

particularly if water has been siphoned from the

aquarium to the filter. Add water conditioner to water

that is added.

Method 2

1. Temporarily detach the outlet from the tubing and

create a siphon by sucking on the tube. Once the

siphon begins, lower the outlet tube into a bucket.

2. Wait until the canister is completely full of water. You

will know this when the water starts to flow into the

bucket.

3. Place your thumb over the open end of the tubing

and affix the outlet pipe to your aquarium.

4. Now the canister filter is ready to be plugged in.

5. Due to the volume of water in the canister filter, it

may be necessary to top up the water in the aquarium.

Add water conditioner to water that is added.