- ページ 11
ラック＆スタンド Avonic AV-MT250 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Avonic AV-MT250 Series 19 ページ。 Ceiling mount
Avonic AV-MT250 Series にも： ユーザーマニュアル (11 ページ)
ページを印刷するUnpacking the Mount
Execute the following steps to unpack the mount and associated components:
1. Open the bag.
2. Verify that the contents of the bag exactly matches the items as described in
If this is NOT the case, contact Avonic and stop here.
The mount should be in its protective foam as follows:
Figure 2: Mount in bag
3. Verify that the plastic mount bag is sealed. If this is NOT the case, contact Avonic and stop here.
4. Break the seal of the sealed mount bag.
5. Take the mount out of the bag.
6. Install the mount following the steps as described in the chapter
Return Procedure
If, for any reason, you have to return the mount to Avonic, Execute the following steps:
1. Place the mount back in its protective bag and in horizontal position!
2. Place the mount with all of its components in the bag.
3. Verify that the contents of the bag exactly matches the items as described in
4. Contact Avonic for the Return Procedure.
AV-MT250
| www.avonic.com
Package Contents
Mounting and Installation
on page 12
Package
Contents.
on page 10.
11