ページを印刷する
Set Up Instructions
1. Remove all of the filter accessories from the
box inside the aquarium.
2. Wash your hands and arms. It is very
important to remove dirt, moisturizer and other
impurities. Do this whenever you work on the
aquarium.
3. Wash the following DO NOT WASH IN
SOAP OR DETERGENT. Glass Tank (Inside)
Under Gravel Filter Plate, Power Head and
both Filter Outlets.
4. Connect the power head to the small uplift
riser that is attached to the under gravel plate
make sure it is installed firmly. Fig 1
5. Outlet Option 1: Connect the extension tube
with the spray bar to the Outlet of the Power
Head. (Located on top of the Power Head) Fig
2
6. Outlet Option 2: Connect the extension tube
with the outflow head into the top of the Power
Head. Fig 3
7. Place the completed Under Gravel Filter
Unit on the base of the aquarium. Fig 4 Note:
The Power Head is a Water Proof Unit.
Fig 1
8. Consider where you are going to place the
aquarium. Keep it away from direct light or
areas with large temperature fluctuations.
9. Place the aquarium on a flat level surface
strong enough to support its weight. We
recommend a genuine Aqua One Aquarium
Cabinet (Sold separately) rather than general
household furniture. Fig 5
Fig 2
Fig 3
Fig 4
Fig 5