- ページ 6

配管製品 Billi OmniOne ProのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Billi OmniOne Pro 9 ページ。 Dispenser options: xl and mixer tap, al
Billi OmniOne Pro にも：インストレーション・マニュアル (7 ページ)

ページを印刷する

Set Up Instructions

Main Status Bar:

Current status may be displayed as follows:

SYSTEM READY

Indicates the Billi OmniOne is ready for use

OVERRIDE OFF

Indicates override off mode has been activated

LOCKED OFF

Indicates locked off mode has been activated

STANDBY MODE

Indicates standby mode has been switched on and the OmniOne is currently in energy saving mode.

Also displayed when time switch mode automatically triggers the OmniOne to move to energy saving mode

FAULT

Indicates fault description if the Billi OmniOne is currently in a fault

Additional Status':

Current status may be displayed as follows in the additional status box:

SAFETY SWITCH ON/OFF – Indicates when childproof safety lock mode has been switched on or off

TIME SWITCH

ON/OFF – Indicates if time switch mode is on or off.

FILTER

OK/DUE SOON/DUE/OVERDUE - Indicates filter status

Home Screen

Setting Time and Date

The Home Screen shows the current date and time. It is important that this is correctly set on installation for correct functionality of your

Billi OmniOne.

Time and date can be set on the Set Time & Date Screen, accessed by pressing the time or date on the Home Screen.

Press

to adjust the time and date. Press

then

SET

Setting Water Delivery Temperatures

Current water delivery temperatures are displayed live on the Home Screen.

Water delivery temperatures can be set using the Set Temperature Screen, accessed by pressing either the boiling or chilled water

temperatures on the Home Screen.

Chilled and sparkling water temperatures are set simultaneously via the chilled water temperature setting.

Press

to adjust temperature.

Press

set boiling water temperature to the tea or coffee preset.

TEA

COFFEE

Once changes have been made, press

SET

then

HOME

QUICK

If extra hot water is required,

can be selected to momentarily bring water to 100°C.

BOIL

Default boiling water temp: 97°C

Default chilled and sparkling water temp: 6°C

Boiling water range: 60°C - 98°C

Chilled and sparkling water range: 4°C – 20°C

For optimal system performance, 6°C is the lowest recommended set temperature for chilled and sparkling water.

Operating Modes and Safety Settings

Operating and safety settings can be set from the Mode Select Screens. These are accessed from the Settings Screen, which is accessed by

pressing the

SETTINGS

button from the Home Screen.

SET

HOME

Once changes have been made, press

then

Billi Filter Cartridges

All Billi OmniOne models feature the Billi swing-change filtration system, allowing for quick and easy filter change. The OmniOne is fitted with

a single carbon filter that utilises BWT's unique Fibron X® technology. This technology features a graded density profile, ensuring maximum

performance and capacity, and provides superior drinking water quality, consistent filter life and peace of mind.

Use only Billi genuine filters designed for this system. All drinking water systems should be flushed after a period of non-use. Your Billi

OmniOne has an automatic flushing cycle which is switched on by default to flush the system for 90 seconds after 48 hours of non-use.

Alternatively, before use, run chilled water continuously until water flow stops to flush the system.

If required, the filter can also be manually flushed by pressing the

pressing the

button on the Home Screen.

FILTER

Filter Settings

Filter settings can be set from the Filter Settings Screens which are accessed from the Settings Screen.

SET

HOME

Once changes have been made, press

then

These settings can also be locked from changes upon request.

to save changes and return to the Home Screen.

HOME

to return to the Home Screen.

button on the Filter Screen, which is accessed by

FLUSH FILTER

to return to the Home Screen.