- ページ 10

水族館 Aqua One AquaGrande 180のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aqua One AquaGrande 180 17 ページ。
Aqua One AquaGrande 180 にも：組み立て説明書 (4 ページ)

ページを印刷する

Tank Maintenance

DAILY

Feed your fish as per instructions on your

fish food container.

Check fish ensure they are eating, breathing and

swimming normally.

Check temperature.

Count fish numbers.

Ensure all filters, pumps, heaters and other

aquarium accessories are functioning correctly.

WEEKLY

Test and adjust pH levels if needed

Use Aqua One quality pH test kit, available from

your local Aqua One Dealer. pH is a measure of

how acidic or alkaline the water is. It is measured

on a scale of 0-14 in which 7 is neutral, less than

7 is acidic and more than 7 is alkaline.

Some species require specific pH levels please

seek advice from your aquarium specialist.

FORTNIGHTLY

25% Water Change

What you will need: A bucket, gravel cleaner,

towel, water conditioner, filter supplement and

clean hands. All items are available from your

local Aqua One retailer.

1. Unplug the light unit and remove it from the

aquarium. Place it somewhere safe away from

water & where it will not be broken / damaged.

2. Turn the power head off.

3. The fish and plants do not need to be removed

when doing any maintenance.

4. Place the towel on the floor in front of the

aquarium to guard from water spillage.

5. Use an Aqua One 4 in 1 algae scraper (sold

separately) and gently scrape away any algae

growing on the glass or filter pipes.

6. Using an Aqua One Gravel Cleaner* (sold

separately) empty approximately 25% of the

aquarium water into the bucket. Take note of how

much water is emptied.

7. Fill the bucket up with the same amount of

water that was removed from the aquarium.

8. Treat the tap water with Aqua One water

conditioner (sold separately) as per the instruc-

tions on the bottle.

9. Let the bucket sit for 10 minutes.

10. Fill the aquarium up slowly to the level

indicated. Fig 21.

11. Turn the power head back on and ensure that

water is flowing out of the spray bar.

12. Test and adjust pH levels.

13. Add a filter supplement.

12. Replace the light unit.

* Refer to the instructions on the back of your

Gravel Cleaner to ensure correct use.

Notes