- ページ 10

キッチン＆ランプ; バス備品 Billi QuadraのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Billi Quadra 13 ページ。 Xl, xt, xr tap options
Billi Quadra にも：インストレーション・マニュアル (8 ページ), ユーザーマニュアル (12 ページ), インストレーション・マニュアル (7 ページ)

User guide

Billi Quadra & Quadra Sparkling Plus – XL.

Installing the CO

1 . Ensure all connections between the

regulator and unit are secure .

Position the regulator on top of the CO

cylinder .

2 . Tighten the bottle by rotating anti-clockwise .

– CO

will escape while you are turning the

bottle . Continue to turn the bottle to form

a seal with the regulator .

3 . Open the pressure regulator by turning the

black knob clockwise .

– Set the initial pressure to around 3 Bar .

– Turn on the unit power and water supply .

– Wait for the unit to come back to

temperature .

4 . Check bottle and connections for leaks using

soapy water to test for bubbles .

NOTE: the ¼" tube and pushfit fittings may

settle when the pressure is turned on .

5 . Increase the pressure to set your level of

carbonation .

Initial set point may vary once the unit is

running, you may need to reset the pressure

once the system has stabilised .

WARNING: do not set the pressure above 5 bar .

cylinder