- ページ 12
室内装飾品 Aqua One Vogue 135のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Aqua One Vogue 135 13 ページ。
ページを印刷するStep 18
Fit the 2 Doors
The easiest way to
attach each Door is to fit
the top Hinge first, then
align and fit the other
Hinge.
a:
Push the Hinge
onto the front part of the
Hinge Plate.
The recess at the bottom
of Screw B goes into the
slot in the Hinge Plate.
b:
Keep the Hinge
FLAT against the Hinge
Plate as you slide it
across as far as it will go.
Tighten Screw A.
c:
The Hinge must be
flat against the Hinge
Plate prior to any
adjustment.
d:
The Hinge must NOT
BE AT AN ANGLE to the
Hinge Plate when
assembled.
This would indicate that
the recess at the bottom
of Screw B had not
located in the slot in the
Hinge Plate and the
Hinge would not be
secure.
Remove the Hinge from
the Hinge Plate and then
re-assemble being
careful to follow
instructions a-c.
e:
Attach a Handle to
each Door using the
19mm Screws.
a:
M
c:
M
Peel off the protective coating on the
panels and edging tape where present
M
N
N
B
d:
N
B
G
L
8
b:
M
A
M
N
e:
L
G
9
N