- ページ 14

バスタブ ABACUS Aquanova Scorpio 1700のPDF インフォメーション・パックをオンラインで閲覧またはダウンロードできます。ABACUS Aquanova Scorpio 1700 18 ページ。 Fixed seat & transfer system

Scorpio 1700 Installation Instructions

CLEANING INFORMATION

The Scorpio bath does not require any major maintenance, but you should follow these simple

instructions. The bath should be wiped down, preferably whilst the bath is draining, with a soft,

damp cloth.

To retain the surface quality of the bath, clean weekly using bathroom cleaning mousse or washing-up

liquid. Warm water and soft cloth is recommended. Stubborn stains may require a non-scratch liquid

cleaner.

Do not use oven cleaners, souring powders or bleach on any of the surfaces. These may spoil the

appearance of your bath. Chalk mark deposits from the water or mild scratches may be removed from

the bath surface with a mild cutting fluid such 'T' Cut or Brasso. This should be applied to the affected

area with a soft cloth and rubbed vigorously until a satisfactory finish is affected. The shine to the area

may then be brought back using a wax-based polish.

WARRANTY

This product is warranted as being free from defects during the period of warranty. This does not cover

minor blemishes, etc. Which may be part of normal manufacturing processes.

The warrenty covers manufacturing defects in the products, starting from the date of supply.

The warrenty is limited to the value of the purchase price paid.

The warrenty is only valid if the product has been used correctly. Where there are any mechanical or

electrical parts, any damage, misuse or tampering with them will render the warranty invalid. Any sealed

electrical boxes must remain unopened or this will invalidate any warranty.

The baths are not covered for any problems that may arise from the installation or site planning unless

carried out by engineers from Abacus Healthcare.

Any consequence arising from unskilled or incorrect handling of the product is not covered

by this guarantee.

The following items, when supplied by Abacus Healthcare are guaranteed for a period of twelve months

from the date of supply for the parts only (labour costs are not covered).

Tap and mixers

Shower hoses, shower heads and shower brackets.

Flexible pipes including waste outlet, hot and cold supply

Hot and cold taps and mixer taps are proprietary fittings and as such carry a standard

manufacturer's warranty.

Note: Thermostatic mixing vaves must be adjusted for the appropriate discharge temperature

by the installer. These require regular maintenance for which Abacus engineers are available.

Electrical

All electrical components are CE marked to comply with current European Standards.

Electrical items must not replaced with alternative components without the authorisation of Abacus

Healthcare.

Failure to obtain such authorisation will exempt tha Company from any liabilityto action for further failure.

THERE IS NO OTHER WARRANTY EXRESSED OR IMPLIED INCLUDING, BUT NOT LIMITED TO, THOSE

OF MECHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

THE FOREGOING WARRANTY IS LIMITED TO THE TIME PERIOD SPECIFIED FROM THE TIME OF

RECEIPT. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE,

OR CONSEQUENTIAL DAMAGES