- ページ 3

チラー Aqua One Arctic 1/6HPのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aqua One Arctic 1/6HP 6 ページ。

Before First Use / Preparation

IMPORTANT INFORMATION

The maximum ambient temperature is 50°C. This

chiller is rated to decrease the water temperature

by up to 7-8°C for the listed aquarium volume. If

the chiller is used inside a cabinet, there must

be adequate ventilation in the cabinet for heat to

escape. At minimum you should consider utilising

at least two cross flowing vents in the cabinet

ideally with an exhaust fan for heat removal.

Read and follow all the instructions, even if you feel

you are familiar with the product and find a place to

keep the instructions handy for future reference.

Hints & Tips

1. Place the unit on a level surface.

2. Allow adequate ventilation. Allow sufficient clearence

to the front and sides of the chiller to allow adequate

air flow.

3. Do not cover the unit. Covering the vents on the

front, back and sides of the chiller could cause the

unit to overheat and will prevent the unit from cooling

efficiently.

4. Do not place items on top of the chiller.

5. Keep the chiller away from direct sunlight, moisture,

dust and flammable materials.

6. Do not tilt the chiller. If the unit has been transported

or stored on the side it must be left upright for 24-48hrs

before being turned on.

7. Heat is generated by light units, especially metal

halides as well as submersible pumps and other

electrical equipment. Consider the heat input of

these items and consider switching off some of these

components in extreme heat conditions.

Your attention is drawn particularly to the sections

concerning "IMPORTANT SAFEGUARDS" and the

"GUARANTEE CONDITIONS". Please ensure you

retain your original purchase receipt in the event that

guarantee service is required.Carefully unpack the

filter making sure you keep all the packing material until

all the parts of the product have been found and the

product has been assembled.

This product is shipped to you in a factory sealed

carton. Should the product malfunction in any way

or if the unit is damaged and requires replacement,

contact the retailer where the product was purchased

for inspection.