スイッチ Allied Telesis AT-8000S/24POEのPDF データシートをオンラインで閲覧またはダウンロードできます。Allied Telesis AT-8000S/24POE 3 ページ。 Layer 2 stackable fast ethernet switch
Allied Telesis AT-8000S/24POE にも： データシート (3 ページ), データシート (3 ページ), データシート (3 ページ), データシート (3 ページ)
ページを印刷する
Datasheet |
Switches
AT -8000S/24POE
Layer 2 Stackable Fast Ethernet Switch
AT -8000S/24POE
24 port stackable 10/100TX Power over
Ethernet switch with 2 active SFP bays
(unpopulated) and 2 standby 10/100/1000T
ports (RJ-45)
Overview
One of a series of stackable switches from
Allied Telesis, the AT-8000S/24POE provides
high performance Layer 2 switching in an
affordable fixed configuration platform
combined with Power over Ethernet to provide
power to edge devices including IP phones and
wireless access points.This switch offers 24
10/100 ports, two fixed SFP Combo slots plus
two integrated stacking connectors that deliver
a total of 4Gbps stacking bandwidth.The
stacking capability integrated into this platform
is configured as a resilient ring topology
designed to provide high reliability and
simplified management for higher port density
applications.
Combined Ethernet and Power for
Branch Office and Wiring Closet
Connectivity
Powerful line rate performance and stackability
make this switch ideal for branch offices or the
wiring closet of larger offices where power is
needed for remote devices.The state-of-the-art
QoS capability of this product ensures reliable
delivery of advanced network services such as
voice while effectively controlling the continually
increasing traffic needs found in today's networks.
Easy Access Networking
Featuring an industry standard CLI and Allied
Telesis' intuitive yet fully featured Web interface
the advanced features of the AT-8000S/24POE
are accessible to a wide range of system
administrators.The well known CLI and Web
interfaces significantly reduce learning time and
minimize the cost of deployment.
Allied Telesis
Secure Management
Only authorized administrators can access the
management interface of the 8000S series.
Protocols such as SSL, SSH and SNMPv3
facilitate this protection of your network with
local or remote connections.
Securing the Network Edge
To ensure the protection of your data, it is
important to control access to your network.
Protocols such as IEEE 802.1x port-based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a pre-
determined part of your network offering guests
such benefits as Internet access while ensuring
the integrity of your private network data.
Gigabit and Fast Ethernet SFP
Support
All switches in the 8000S family support both
Gigabit and Fast Ethernet Small Form-factor
Pluggables (SFPs).This makes the 8000S series
an ideal family for environments where Gigabit
fiber switches will be phased-in over time.The
8000S family allows for connectivity to the
legacy 100FX hardware until it is upgraded to
Gigabit. Support for both speeds of SFPs allows
organizations to stay within budget as they
migrate to faster technologies.
0
%
+
Power Supply Efficiency
Key Features
Easy,Well Known Management
•
Industry standard CLI
•
Simple intuitive, fully featured Allied Telesis
Web Interface
•
Secure encrypted Web and CLI management
with SSHv2 and SSL
•
SNMP
•
Two level access privileges
Power over Ethernet
•
Provides standards-based IEEE 802.3af
Power over Ethernet to all 24 10/100 ports
•
Support for up to 24 class 2 powered
devices at 7.3 watts
•
Support for up to 12 class 3 powered
devices at 15.4 watts
Affordable Truly Stackable 10/100 Switching
Platform
•
Single IP address stack management
•
4G resilient ring stacking architecture
•
Across stack link aggregation
•
Across stack VLAN configuration
•
Across stack port mirroring
•
Redundant standby stack master
All the QoS Needed in the Wiring Closet for
Today's Voice and Data Networking
•
Eight priorities assigned to four queues
•
IEEE 802.1p for Layer 2 QoS
•
DSCP (DiffServ) for Layer 3 QoS
•
IEEE 802.1p to DSCP remarking traffic ready
for transport to the Layer 3 core of the
network
•
Layer 2 and Layer 3 ACL
Securing the Network at its Most Vulnerable
Point
•
IEEE 802.1x and RADIUS network login: for
advanced control of user authentication and
accountability
•
Guest VLAN: to ensure visitors or unauthorized
users connect only to services defined by IT
e.g. Internet
•
TACACS+: for ease of management security
administration
•
Layer 2 and Layer 3 ACL
•
Port MAC address security options
www.alliedtelesis.com