マトリックススイッチャー AVPro Edge ConferX AC-CX84-AUHDのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。AVPro Edge ConferX AC-CX84-AUHD 6 ページ。 8 input, 4 output hdmi classroom/conference room matrix switcher
ページを印刷する8 input, 4 output HDMI Classroom/Conference Room Matrix switcher
Quick Start Guide
The AC-CX84-AUHD is the premiere switch for large conference room solutions solving needs for
source extension, display extension, and 4k distribution. With a mix of HDB
CX84 can easily allow for divisible conference rooms with both local and distant displays up to 100
meters. Allowing for integration even with legacy projectors using the 1080p down scaler on the
HDB
T Outputs.
ase
This quick start guide will be going through:
• Installation
• Front Panel Control
• EDID management
• IR & RS-232 Control
• LAN Control
• troubleshooting
Quick Installation:
1. Connect the HDMI/HDBT input sources (PC, Wall Plate, etc...) to the AC-CX42-AUHD/AC-CX62-AUHD.
2. Connect the HDMI/HDBT output devices (Display, Distribution Amplifier, Projector, Receiver) to
the AC-CX84-AUHD.
3. Power on the sources.
4. Connect the power supply into the AC-CX84-AUHD.
5. Turn on output devices/displays.
6. Use the front panel controls, supplied IR remote or free LAN (IP: 192.168.001.239) to control
the matrix.
Front Panel Control and commands:
Front Panel:
AC-cx84-auhd
T and HDMI Outputs the
ase