- ページ 2
エクステンダー AVPro Edge AC-EX70-SC2-RのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。AVPro Edge AC-EX70-SC2-R 4 ページ。 A 70 meter hdbaset receiver with our sc2 scaler built in
AVPro Edge AC-EX70-SC2-R にも: ユーザーマニュアル (17 ページ)
Micro USB/RS232- for firmware and control:
In order to connect your computer to the Scaler by rs-232 you need to make your own cable with one end
a phoenix connector and the other end a rs-232 port. Your computer doesn't have a rs-232 input, get a usb
rs232
Micro usb
converter (as shown below), and plug the
usb end into any computer
Output Timing:
The AVPro Edge's AC-SC2-AUHD is the ideal solution for anyone that is needing to distribute a signal to a
variety of displays and keep an optimal picture. be able to control up/down scaling and also handle EDID
issues (including 4K HDR EDID's),
image enhancement, and the ability to de-embed 2 Channel Analog
and 6 Channel Digital audio from stream.
To control the output timing press the output setup button until the
led
is lit at the corresponding setting numbers. if you have 480, 720, or 1080 displays the AC-SC2-AUHD will
make sure it's getting the right picture with adaptive mode. Signals below 1080p 60Hz get upscaled to
1080p 60Hz, while signals above 1080p 60Hz are bypassed by the scaler.
(Pic of EDID lights and EDID Settings)
EDID SETTINGS
With EDID Settings you can manage the sources devices and force a certain output. This is especially
important on newer sources that rely on EDID communications in implement high bandwidth and HDR
signals. To control EDID press the EDID Settings button until the led
is lit at the corresponding setting numbers.