- ページ 10
スイッチ Allied Telesis AT-9812TFのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Allied Telesis AT-9812TF 11 ページ。 At-9800 series
Allied Telesis AT-9812TF にも： クイック・インストール・マニュアル (12 ページ)
ページを印刷する
10
6.
Log in
At the log in prompt, enter the log in name and password.
User Name: manager
Password: friend
The system status page appears and you can now use the GUI to configure
the switch.
To ensure configuration settings are saved correctly, use the GUI pages' menus and
buttons to navigate, not your browser's buttons.
As a security precaution, change the password as soon as possible.
To change the password, select Management > Users from the sidebar
menu. Select the Manager account and click Modify.
7.
To access context-sensitive help
Click on the Help Button [Help] on each page.
System LEDs
Table 2: System LEDs for AT-9800 Series switches.
LED
State
PWR
Green
(Power)
Fault
Red
1 Flash
2 Flashes
3 Flashes
4 Flashes
5 Flashes
6 Flashes
RPS (Redundant
Green
Power Supply)
CompactFlash
Green
Activity
(Rear panel)
Function
The switch is receiving power
The switch or management software is malfunctioning
A switch fan has failed or is operating below the
recommended speed
If RPS monitoring is enabled, an RPS fan has failed or is
operating below the recommended speed
If an RPS is connected, the switch's PSU (Power Supply
Unit) has failed
If RPS monitoring is enabled, the RPS PSU has failed
If RPS monitoring is enabled, an RPS is not connected or
is not operational
The switch's temperature has exceeded the
recommended threshold
An RPS is connected to the switch and is receiving
power
The compact flash memory is active. Do not eject the
flash memory module
AT-9800 Series
C613-04038-01 REV D