ページを印刷するASSEMBLY
nOTICE
Carefully remove all parts from the packing box .
Locate all hardware and components before
installation .
nOTICE
Do not completely tighten bolts until assembly is
completed . For easier assembly, we recommend that
two people assemble this product .
WARnInG
Ensure there are no live electric wires or plumbing
in the wall where you mount the hose reel .
WARnInG
Always use eye-protection when using power tools .
Install Mounting Rail to Masonry Wall
1 . Position the mounting rail on the wall at a convenient
height .
2 . Use a bubble level to ensure the mounting rail is
horizontal .
3 . Mark hole centre locations on the wall .
8
Install Mounting Rail to Masonry Wall Cont'd
4 . Using a 13mm (½ in .) masonry drill bit, drill
approximately 3 .8cm (1 .5 in .) deep centered on the
marks you made in step 3 .
5 . Using a hammer, lightly tap the masonry anchors into
the holes, being careful not to damage them, until
fully seated . Remove the nuts and washers .
6 . Hang the mounting rail onto the exposed anchors .
7 . Replace the nuts and washers, tightening them with
a wrench .
100361
ENGLISH
3.8cm