- ページ 11

水ポンプ CPE C SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。CPE C Series 19 ページ。 Portable pump
CPE C Series にも：取扱説明書 (18 ページ)

CPE Systems Inc.

3. At a location behind the backplate, scribe a mark on the shaft. See figures below.

4. Remove casing clamp, casing, and backplate.

5. Slide the drive collar onto the shaft.

6. Locate drive collar in relation to the scribe mark as shown in dimension A and secure

to the shaft with the set screws. Drive collar location is critical.

Model

"A" Dimension

C114

1 1/32" (2.3 mm)

C216

1 1/32" (2.3 mm)

C218

1 1/32" (2.3 mm)

C328

1 1/32" (2.3 mm)

C4410

1 1/32" (2.3 mm)

7. Install the seal spring, seal cups, seal o-ring, and carbon onto the shaft.

www.cpesystems.com

+1 800 668 2268