- ページ 10

オーブン CPG 351CHSP1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CPG 351CHSP1 14 ページ。 Electric cook & hold ovens
CPG 351CHSP1 にも：ユーザーマニュアル (15 ページ)

User Manual

351CHSP(1/2) | 351CHCT1A | 351CHUC1(A/B)

Operating Instructions

Shutdown Instructions

•

WARNING: THE OVEN AND ITS PARTS ARE HOT.

Be very careful when operating, cleaning, or servicing the oven.

1. Turn the Holding Temperature and Cooking Temperature Knobs counter-clockwise until they stop at the

OFF position.

2. Open door slightly to allow ventilation and a further cool-down period. This is to allow oven to properly

cool-down so components are not damaged.

NOTE: Wait at least 15 minutes before turning Power Switch to OFF. The cooling fans need to operate

during the cool-down period. The cooling fans will automatically turn off when the proper temperature is

reached.

3. Turn Power Switch to OFF position.

For expanded shutdown, continue with these last 3 steps:

4. Unplug the oven.

5. Thoroughly clean the oven (see Cleaning & Maintenance on page 11).

6. Leave the door(s) slightly open to allow ventilation and preservation of the gasket(s).

Warnings

•

Always ensure proper supervision while the equipment is in use.

•

Simple adjustments to knobs, leg height, etc. do not require assistance from specialized personnel. For

more technical adjustments, please consult a qualified technician.

•

Use only parts and accessories recommended by Cooking Performance Group.

•

Burnoff instructions if applicable

•

The equipment will remain hot for a short time after use (residual heat). Avoid all physical contact with

the unit during this time to prevent injury.

•

This equipment is strictly for professional use and must be used by qualified personnel.

•

The installation, startup, and maintenance of this equipment must be carried out by a qualified

technician.

•

All installation must be carried out according to the law. Cooking Performance Group is not responsible

for damages due to an incorrect installation, improper maintenance, or incorrect use.

•

These are very important regulations; if they are neglected, the equipment may not perform properly or

the user may be placed at risk and void manufacturer warranty.