- ページ 9

ネットワーク・ハードウェア cphnano SpectroLink USB650のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。cphnano SpectroLink USB650 20 ページ。

1. Make sure Bluetooth is enabled on your

mobile device and enter the BerryLan

app.

2. The app immediately starts searching

for your SpectroLink™. It should appear

as CPHNANO after around 50s from

powering it on. Tap on it and proceed.

3. On the next view, the app asks you to

choose an access point. Select the one

you would like to connect with your

SpectroLink™.

4. The app will prompt you to enter the

password for your access point. Once

it has been entered, your SpectroLink™

will proceed to start up and be ready to

use.

Ethernet setup

Another way of getting your Spectro

Link™ online is using an ethernet cable.

With an ethernet setup one can skip

paragraph 2.

Connecting SpectroLink™ to

the spectrophotometer

1. Connect the USB cable to the

USB-A socket on your SpectroLink™

and the other end to the USB socket

of your spectrophotometer.

2. Power on your spectrophotometer.

3. Enable USB mode on your spectro-

photometer if available and ne-

cessary for USB communication.