コンピュータ・ハードウェア DG FPGAのPDF セットアップをオンラインで閲覧またはダウンロードできます。DG FPGA 8 ページ。
DG FPGA にも：セットアップ (5 ページ), セットアップ (14 ページ), セットアップ (20 ページ), セットアップ (10 ページ), セットアップ (18 ページ)

dg_ftp25g_server_fpgasetup_en.doc

This document describes how to setup FPGA board and prepare the test environment for running

FTP 25G Server demo on FPGA development board by using FileZilla version 3.45.1 as FTP

client. NVMe SSD is applied as the storage for storing file transferred with TestPC by using FTP

protocol via 25Gb Ethernet. User sets the test parameters on FPGA and monitors the hardware

status via Serial console.

1 Environment Requirement

To run FTP Server demo, please prepare following test environment.

1) FPGA development board: KCU116

2) Test PC with 25 Gigabit Ethernet card and installed program as follows:

• Vivado tool for program the FPGA

• FileZilla version 3.45.1 to be test application

• Serial console software such as HyperTerminal or TeraTerm. The setting on the

console is Baudrate=115,200, Data=8-bit, Non-parity, and Stop=1.

3) 25 Gb Ethernet cable: 25G SFP28 Active Optical Cable (AOC)

4) The PCIe adapter board (AB18-PCIeX16 or AB16-PCIeXOVR) provided by Design

Gateway

https://dgway.com/ABseries_E.html

5) NVMe SSD connecting to PCIe adapter board

6) Two micro USB cables connecting between FPGA board and PC (one for programming

FPGA and another for Serial console)

7) Xilinx power adapter for FPGA board

8) ATX power supply for AB18-PCIeX16 or AB16-PCIeXOVR adapter board

14-Oct-20

FTP 25G Server FPGA Setup

Rev1.0 14-Oct-20

Page 1