- ページ 9

スピーカー Avsl 178.715UKのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avsl 178.715UK 9 ページ。 Active speaker cabinets with dsp

ページを印刷する

The EQ nodes are editable in the EqParameter section in the same way as for the main Input tab.

These nodes can be clicked and moved around the screen or adjusted numerically by frequency, Boost and Q

settings at the bottom left of the window. Either click on the  buttons or enter the value directly.

Clicking "Reset" returns all values to default settings.

In the Crossover section, the L and H nodes can also be dragged on the screen or adjustable via 2 virtual

sliders, or  buttons, or by entering the values directly. Also in this section are drop-down options for the

filter-type (Bypass or Butterworth 12/24/36/48). The crossover uses an industry standard Butterworth filter

type and the number dictates the steepness of the filter slope. 12, 24, 36 or 48 deciBels per octave (dB/oct)

with higher numbers having a steeper (more focused) slope.

Overall Gain is handled by a vertical virtual slider, or  buttons, or by entering the values directly.

This section also has a "tick" button to invert the signal (reverse polarity) if required for phase alignment.

A Limiter section has a tick button for on/off and sliders for 4 parameters.

•

Limiter(dB) sets the signal level (in dB) that the limiter becomes activated.

•

Rmstc(dB/s) sets the reaction speed in deciBels per second.

•

Hold(ms) sets how long the limiter remains active after the signal drops below the Limiter(dB) level.

•

Decay(dB/s) adjusts the release curve of the limiter after any Hold time.

When all relevant settings are made, they can be saved to the speaker and/or stored on the laptop for future

use as required.

Specifications

Model

Power supply

Amplifier construction

Main driver

Voice coil

HF driver

Power: rms

Power: max.

Max. SPL

Frequency response

Inputs

Audio source

Line output

DSP settings

Flying Points

Dimensions

Weight

Hereby, AVSL Group Ltd. declares that the radio equipment type 178.152UK and 178.155UK is in compliance with

The full text of the EU declaration of conformity for 178.152UK is available at the following internet

The full text of the EU declaration of conformity for 178.155UK is available at the following internet

CLARA-12A

90-254Vac, 50/60Hz (IEC)

Class-D bi-amplifier with DSP

300mmØ (12")

63mmØ (2.5")

34mm (1.35") Ti CD

350 + 50W

800W

125.0dB

50Hz – 19kHz

XLR/jack mic/line, XLR/jack line

Bluetooth receiver

XLR

Normal, Jazz, Pop, Classic, Custom

3 x M8 for vertical suspension

610 x 380 x 350mm

16.5kg

Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste

at the end of its useful life. The goods must be disposed of according to your local council guidelines.

AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland.

CLARA-15A

380mmØ (15")

63mmØ (2.5")

44mm (1.75") Ti CD

400 + 70W

1000W

126.0dB

45Hz – 19kHz

710 x 435 x 385mm

20.5kg

Directive 2014/53/EU

address:http://www.avsl.com/assets/exportdoc/1/7/178152UK%20CE.pdf

address:http://www.avsl.com/assets/exportdoc/1/7/178155UK%20CE.pdf

AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ

CLARA active speaker cabinets User Manual