- ページ 3

マイク Avsl 953.230UKのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avsl 953.230UK 4 ページ。 Active paging station

Connections and Controls

Speaker connections

Connect speakers to the Zone 1 and Zone 2 speaker terminals (9, 10) using 2-core speaker cable.

The green Euroblock screw terminals may be unplugged from the rear panel for easier connection.

Connect the "+" terminal to the "+" connection of the speaker.

Connect the "-" terminal to the "-" connection of the speaker.

Each speaker zone output can deliver 30W total at 4Ω.

This means that a single 8Ω speaker may be

connected to either zone, receiving up to 15W.

Alternatively, 2 x 8Ω speakers may be connected in

parallel to either zone, each receiving up to 15W.

Both of these scenarios are shown in the diagram

opposite.

Another option would be to connect a single 4Ω

speaker to either speaker zone output, which would

receive up to 30W.

Ensure that the combined impedance connected to each speaker output is not lower than 4Ω and that

the speakers connected can handle the output power at that combined load impedance.

1. XLR microphone connector

2. Aux and Mic signal indicators

3. Zone 1 paging select button

4. Zone 2 paging select button

5. Microphone paging button

6. 3.5mm Aux input jack

7. Aux output level

8. Mic output level

9. Zone 1 speaker output terminals

10. Zone 2 speaker output terminals

11. DC power adaptor input

953.230UK User Manual