ページを印刷するMIGHTY8 BACK PANEL
CD/MP3 JACK
You can connect a CD player, MP3 player or other kind of device and play along with songs.
Note: Adjust the mix level by adjusting the volume control of the connected device.
MIXER/PHONES JACK
Use mono 1/4 phone plugs when connecting to this jack or connect headphones to this jack.
Note: No sound is played through the unit's speaker while the MIXER/PHONES jack is in use.
9V IN
Connect the included AC adapter to this jack. Ensure that the adapter's voltage rating matches your local AC
power rating before you plug the cord into the wall outlet. The included AC adapter has centre minus plug and a
rated output of 9 volts DC, 1A.
Note: you can use a 9-12V AC adapter with the unit, when a 12V AC adapter is used, the unit can provide 6.5W
power output.
Warning: Do NOT use an adapter with output greater than 12V AC.
TUNING
1.
Press and hold TUNER/SELECT button for 2 seconds. When the display shows a line like this, you are
in TUNER mode.
Note Reference Pitch; A4=440Hz
2.
Tune the string until the indictors change from red to green indicating you are in tune.
Tuning mode
Flat
MIGHTY8 can show twelve key names:
Specifications:
Sampling frequency:
44.1 kHz
A/D, D/A convert:
24bit
Signal processing:
32bit
Display:
7-segment LED
Nominal Input impedance:
1Mohms
CD/MP3 Input:
-10dBu/3.3kohms
LINE IN Input:
-10dBu/3.3kohms
MIXER/PHONES output:
20mW+20mW (into 32-ohm load)
Rated Power Output:
4W@9V DC, 6.5W@12DC (THD+N<10%)
Power Supply of Unit:
9V DC, 1A to 12V DC 1A (Centre minus plug)
Batteries:
LR6 Type (6 x AA, Alkaline)
Approx. 8 hours of operation (alkaline batteries)
Dimensions:
260L x 170W x 240H (mm)
Weight:
3.9Kg
Accessories:
Owner's Manual
Optional accessories:
9V Power adapter, Strap
Note: In the interest of product improvement, the specifications and/or appearance of this unit are subject to
change without prior notice.
In tune
Sharp