電話アクセサリー CPR Call BlockerのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CPR Call Blocker 2 ページ。 All-in-one call blocker
CPR Call Blocker にも：ユーザーマニュアル (13 ページ)

ページを印刷する

I N T R O D U C T I O N

Congratulations on your new purchase!

Before using this guide there are a few things you need to know:-

• Call Blocker protects a single phone, or a cordless phone with multiple handsets

• CPR Call Blocker requires your line to have Caller Identity service (Caller ID) from your

telephone operator.

US ER G UI D E

• Caller ID is a service that forwards the caller's number to you with each call. It is available

from most telephone companies. You might be familiar with this from your mobile phone. To

BT and most other providers.

• The CPR Call Blocker will work with a wide range of telephone equipment including corded

and cordless phones. It protects all the phones that are plugged into it. If you need a

number of extensions in your house we recommend that you use a modern multi-handset

cordless phone system so that The CPR Call Blocker can protect all your phones.

• We recommend that you don't use the CPR Call Blocker with phones plugged into other

extension sockets in your house. These may give a short ring when calls from unknown

callers are received, and won't ring when the caller is put through.

• Some phones automatically check the 1571 network voicemail service at regular intervals

and display a 'Message waiting' light. These are called 1571 phones. We recommend that you

do not use 1571 phones with The CPR Call Blocker

• We recommend that you don't plug The CPR Call Blocker into a wireless phone line

www.cprcallblocker.com

extension box, as these don't forward Caller ID.

S E T T I N G U P

C P R C A L L B L O C K E R

Step 1

Remove the line cable from your telephone and plug into the LINE 1 port of the Call

Blocker.

02.

Step 2

Use the small Black cable provided to connect the TEL 1 port to your telephone

Step 3

Insure all cables are connected securely

The Call Blocker is setup correctly when there is a red light displayed on the top of the

unit, this is shown when the phone is oﬀ the reciever or when on a call. If you are using

a cordless phone then press the Call Button for a dial tone.

If you have no dial tone or no red light you will need to disconnect then reconnect the

Cables using the LINE 2 and TEL 2 ports.

I N S T A L L A T I O N

D I A G R A M

Short Black

Cable Provided

Main Wall

Socket

Telephone

line Cable

B L O C K N O W

The easiest way block Nuisance Callers is to use the BLOCK NOW button located on the

top of the Call Blocker.

When a Nuisance Caller gets through press the 'BLOCK NOW' and hang up the call, this

Caller will now be blocked from calling you again.

You can also use this function without having to answer the phone.

For example: If an unfamiliar number is calling, you can press the BLOCK NOW button

and it will block that number from calling you again.

If you are recieving nuisance calls from 'WITHELD' or 'INTERNATIONAL' numbers use the

programming codes on page 5.

P R O G R A M M I N G

C O D E S

Programming a number into "Blocking" list

* 7 #

"Beep"

1. Pick up the telephone and input

you will hear a

2. Then enter the telephone number you wish to block, followed by the

key,

You will hear a 'beep' to confirm success.

3. Enter the next number or hang up to complete setup.

Erasing one Number from the "Blocking" list

* 6 #

'beep'

1. Pick up the telephone and input

you will hear a

2. Then enter the telephone number you wish to delete followed by the

key,

you will hear a 'beep' to confirm success.

3. Hang up to complete setup.

Resetting the Call Blocker back to factory settings

* 1 # * 1 #

1. Get a dial tone and input

You will hear a 'beep' to confirm success.

Note:

"Beeps"

Two

means an error has occurred - Either a number has been entered

incorrectly or a blocking function is already ON.