- ページ 11

ゲートウェイ 2Wire Gateway 100 SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。2Wire Gateway 100 Series 19 ページ。 Usb driver installation for macintosh computers
2Wire Gateway 100 Series にも：ドライバーのインストール (1 ページ)

ページを印刷する

Installing the Gateway and USB Driver on Macintosh Computers Running OS 10.2

Before making your USB connection to the gateway, you must install the 2Wire gateway USB driver on your

computer. The following instructions are for USB installation on Macintosh computers running OS 10.2.

With your computer powered on and the 2Wire Setup Wizard CD still in the CD-ROM drive, double-click

the

icon on your desktop.

2Wire CD

Double-click

2Wire USB

If you have set up an administrator name and password, the Authenticate screen opens. Enter your

administrator name and password and click

Follow the on-screen instructions. When the driver installation is complete, you will be prompted to

restart your computer.

After your computer restarts, connect the provided blue USB cable from the USB port on the 2Wire

gateway to your computer's USB port. A USB port is identified by the following icon:

Open the network Control Panel and select the

Verify that

Ethernet Adapter (en1)

When the New Port Detected message displays, click

Note:

Your Macintosh computer usually names the gateway USB port as (en1) automatically. If

your computer has more than one Ethernet-like network device installed, the USB port may be

names (en2) or higher.

Click

to complete your installation.

Save

Restart the 2Wire Setup Wizard CD to resume your installation process:

IMPORTANT:

−

Double-click on the

−

Double-click the

gateway to the Internet.

to begin the driver installation.

is selected in the Show field. If not, select it from the pull-down menu.

icon.

2Wire CD

icon and follow the on-screen instructions to configure your

2Wire Setup Wizard

Gateway Installation and Support Guide

Apple icon > System Preferences... > Network