- ページ 11

プロジェクターアクセサリー AVstumpfl vario SHIFT-LEG ADAPTIONのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AVstumpfl vario SHIFT-LEG ADAPTION 13 ページ。

THROUGH HOLE 6mm

First select the position according to the specified minimum distances (see page 9-10).
The hole must be drilled at a distance of 16mm from the outer edge of the profile.
For a perfectly fitting, vertical drilling, we recommend using a column drill with a vice.
Optionally mark the hole on each side accordingly and drill only one wall thickness.
VARIO 32: hole exactly in the middle of the profile (16mm)
VARIO64 hole 16mm from the outer edge of the profile, exactly on the first outer decorative groove.
Risk of injury!
(Picture Vario 32)

EXTENSION HOLE 8mm

Extension hole from 6mm to 8mm on the front of the profile (side of the surface attachment)
Risk of injury!
(Picture Vario 32)
16mm
(Picture Vario 64)
8mm
(Picture Vario 64)
16mm
8mm
11