ページを印刷する4. CHANNEL SETTING BRIEF NOTE
Press and hold the〔
Press〔
〔
〕key to select the number of Channel.
Press〔
desired CTCSS/DCS ( CTCSS 1 – 53, DCS 1 – 104 )
Press〔
pressing〔
pressing〔
Press〔
key and confirmit by pressing〔
Press〔
functions , press〔
to complete this setting.
Press〔
after Lock, the unit can only be allowed to adjust volume or transmit and receive.
5. OPERATION
5.1 【Power On / Off】
To turn the radio on or off, press and hold the power on〔
5.2 【Volume】
Adjust the volume level by using〔
5.3 【Transmission】
Press and hold the〔
transmission. Release the〔
5.4 【Reception】
Listen for activity on the selected channel.
5.5 【Key Lock】
〕key and〔
Press〔
5.6 【Channel Selection】
〕key and〔
Press〔
〔
〕key and confirm It by pressing〔
hold the 〔
〕key.
5.7 【CTCSS / DCS】
During setting, to press the〔
number by pressing〔
〕key on the top of the unit.
〕key and〔
〕key simultaneously until the letter CH is blinking, press
〕key and the screen will display CTC off , press〔
〕key until "SC***" is blinking, to select the scanning ON/OFF by
〕key and confirm it by pressing〔
〕key.
〕key until "Po***" is blinking, to select Power HI/Lo by pressing〔
〕key to complete this setting or to press〔
〕key to select number, you may press〔
〕key at the side and〔
〕key while speaking at about 5cm from the microphone for
〕key to return to standby mode.
〕key simultaneously to select Key Lock ON / OFF
〕until "** CH" is blinking, to select the channel number by pressing
〕key until "CTCSS / DCS***" is blinking, to select the CTCSS /DCS
〕key and confirm it by pressing〔
〕Key.
〕key simultaneously to LOCK /UNLOCK the unit,
〕key .
〕key (8 steps)
〕key . To select channel quickly, press and
〕key to select your
〕key. to cancel the scanning by
〕key again to have the other
〕key at any time
〕key.
〕