- ページ 12

防犯カメラ Avtech AVC489AのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avtech AVC489A 19 ページ。 High resolution dome camera

Step5 Adjust the angle of the camera
To adjust the angle of the camera, swivel the
black rotatable plate from the center to the left
or to the right, maximum 60° (Pan).
Adjust the tilt angle by moving the lens,
maximum 90° (Tilt).
Use a flat-headed screwdriver to loosen the
pivots on the lens. First adjust the 1
zoom-in / out (Zoom). Second, adjust the 2
pivot to fine-tune the clearness of the images.
Secure these two pivots after the adjustment
is completed.
Finally fasten the screw on the side of lens to
fix the tilt angle after the optimized positioning
is achieved.
Note: When adjusting the title angle, please do not tilt the camera lens more than 90°.
Step5 Adjust the angle of the camera
To adjust the angle of the camera, swivel the
black rotatable plate from the center to the left
or to the right, maximum 60° (Pan).
Adjust the tilt angle by moving the lens,
maximum 90° (Tilt).
Use a flat-headed screwdriver to loosen the
pivots on the lens. First adjust the 1
zoom-in / out (Zoom). Second, adjust the 2
pivot to fine-tune the clearness of the images.
Secure these two pivots after the adjustment
is completed.
Finally fasten the screw on the side of lens to
fix the tilt angle after the optimized positioning
is achieved.
Note: When adjusting the title angle, please do not tilt the camera lens more than 90°.
st
pivot to
nd
6
st
pivot to
nd
6