- ページ 7

ネットワーク・ルーター Allied Telesis Rapier SeriesのPDF ハウツーをオンラインで閲覧またはダウンロードできます。Allied Telesis Rapier Series 8 ページ。 How to set up pppoe between a linux client and access concentrator
Allied Telesis Rapier Series にも：トラブルシューティングマニュアル (8 ページ), トラブルシューティング (5 ページ), リリースノート (8 ページ), 設定方法 (9 ページ)

ページを印刷する

Multiple calls

Alter the configuration of the Allied Telesis device:

add user=tester1 password=password

set user=tester1 ipaddress=192.168.0.2 netmask=255.255.255.255

add user=tester2 password=password

set user=tester2 ipaddress=192.168.0.3 netmask=255.255.255.255

add user=tester3 password=password

set user=tester3 ipaddress=192.168.0.4 netmask=255.255.255.255

set ppp acservice=test maxsessions=3

2. Configure the linux device:

[root@linux_client michael]# ls -l /etc/ppp/peers/

total 12

-rw-r--r--

[root@linux_client michael]# cat /etc/ppp/peers/tester1

name tester1

idle 30

[root@linux_client michael]# cat /etc/ppp/peers/tester2

name tester2

idle 30

[root@linux_client michael]# cat /etc/ppp/peers/tester3

name tester3

idle 30

The "idle 30" means that after 30 seconds, if no traffic goes over a ppp interface, that interface

is brought down.

3. Initiate the connection:

[root@linux_client michael]# pppd pty 'pppoe -I eth1 -U' call tester1

If you want to initiate more than one connection, simply repeat the above command, but

change the call name (as underlined).

Set Up PPPoE Between a Linux Client and an Allied Telesis Access Concentrator

To make multiple calls to the Access Concentrator:

1 root root 21 Aug 10 08:48 tester1

1 root root 21 Aug 10 08:51 tester2

1 root root 21 Aug 10 08:51 tester3