- ページ 5

防犯カメラ Avtech AVT1301のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avtech AVT1301 7 ページ。 Hd cctv total solution

ページを印刷する

DAY /

NIGHT

AWB

MODE

AWB

MODE

(automatic

exposure)

BRIGHT

SHUTTER

FLICKER

BLC

AGC

LSC

DESCRIPTION

No function for this model.

Automatically adjust the white balance based on the surrounding

AUTO

environment.

Manually adjust the white balance parameters.

USER

Choose USER, and click

modify R / G / B gain parameters.

(PUSH)

It's used for the environment surrounded largely by a particular color,

such as blue, causing color confusion. Aim the camera to a white

place, and select (PUSH) to memory this white. Then, aim the

camera to where it's supposed to face.

HOLD

It's used to force the camera memorizing the current white balance

setting and remain the same even when the environment is changed.

8000K /

Switch to the suitable color temperature based on the current

6000K /

environment to get the right color.

4200K /

8000K = Shade; 6000K = Cloud; 4200K = White fluorescent; 3200K =

3200K

Halogen light bulb.

R-G GAIN

Adjust the red-green value from 1 ~ 255.

B-G GAIN

Adjust the blue-green value from 1 ~ 255

ESC

Not available for this model.

HOLD

Not available for this model.

0 ~ 255

Set the level of brightness to adjust the brightness of the image.

The more the value, the brighter the image.

AUTO

Automatically adjust the shutter speed for exposure based on the

current environment.

1/25

Manually choose the shutter speed you need for exposure.

1/30

1/50

1/60

1/100

1/120

1/250

1/500

1/1000

1/3000

1/10000

OFF / 50HZ /

Enable this function to fix the flicker situation.

60HZ

0 ~ 16

Adjust the image to compensate for an area that is overpowered by

brightness because of excessive light. The image will be properly

exposed for clearness.

Note: This function is available only in the day mode.

1 ~ 5

Set the level of Auto Gain Control to detect and enhance the image

signals when the light condition is poor.

The higher the value, the stronger the signals will be enhanced, and

the more noise the image will get.

ON / OFF

Enable or disable Lens Shading Correction to correct the

phenomenon of vignetting when the focal length is short.

(ENTER) to enter the USER MODE to

