ページを印刷する
Item
DEFOG
ANGLE OF VIEW
IR CONTROL
ENHANCE IR
IR TURN ON LEVEL
IR DELAY TIME
RESET DEFAULT
REBOOT THE SYSTEM
Description
Select ON to enable the defog function in poor weather conditions such as fog, smog or smoke. The
captured image can be improved.
This function is used to slightly calibrate the viewing angle when the focal length and focus
adjustment is completed. Select "DOWN" if your camera lens is facing down; select "UP" if your
camera lens is facing up.
Select AUTO to automatically enable IR LEDs at night or in the dark environment, or OFF to disable
this function.
This function is used to enhance IR LEDs performance for longer projection distance.
Note: It's not recommended to enable this function for a long time as it might impair the lifetime of IR LEDs
Select the level for IR light to activate. 0 ~ 20 . The higher the value, the more sensitive the IR light to
activate.
Set the delay time from 1 ~ 60 in second after which the day and night switch is made, or select 0 to
disable this function.
This is used for the environment where the light condition may change suddenly and usually last for a
short time, for example, the entrance of a parking lot. It may cause the day & night mode switching
constantly and damage the camera.
With this function, the camera will delay the mode switch at night since the light change is temporary
and unnecessary to pay attention.
Click to reset all camera settings to their default values. The camera will reboot to complete the reset
process.
Click to reboot the camera if necessary.