- ページ 7

防犯カメラ Avtech AVT583のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avtech AVT583 14 ページ。 Speed dome camera

ページを印刷する

Item

WHITE BALANCE

SHARPNESS

SLOW SHUTTER

MIRROR

FLIP

3D DENOISE

2D DENOISE

EXPOSURE VALUE

WIDE DYNAMIC RANGE

FIXED SHUTTER

EFLIP

DEFOG

MIRIS CALIBRATION

RESET DEFAULT

REBOOT THE SYSTEM

Description

Process the current image to retain color balance over a color temperature range.

The options are: AUTO, 2500K, 3200K, 4200K, 5800K & 9500K.

Sharpness enhances the clarity of image detail by adjusting the aperture and sharpening the

edges in the pictures.

Hold and drag the slider to adjust the level of sharpness. The higher the value, the sharper

the image.

Slow shutter is used to increase the exposure time to get clearer image, for example, at night.

The options are: AUTO, 1/15 and 1/6.

Select "ON" to rotate the images horizontally based on your installation situation when

necessary.

Select "ON" to rotate the image 180° when necessary.

Click and drag the slider to adjust the level from 0 ~ 5 to decrease the noise shown in the

dark environment.

3D denoise analyzes successive pictures to decrease the noise dramatically, but the moving

objects might be shown as blurred.

Click and drag the slider to adjust the level from 0 ~ 5 to decrease the noise shown in the

dark environment.

2D denoise analyzes only a single picture to decrease the noise. The moving objects can

remain smooth edges, but the effect might be limited.

Drag the slider to adjust the exposure level from 0 ~ 4.

Wide Dynamic Range (WDR) is used when users need to increase image recognizability in

overexposure and dark areas.

The options are: LOW / MIDDLE / HIGH / OFF

Shutter Speed is a function that can adjust the duration of the electronic shutter to produce

optimum image quality. Select the shutter speed suitable for your environment.

This function is used to keep the image upright always after pan / tilt movement.

The options are: OFF / DIGITAL / MECHANICAL.

Select "ON" to enable the defog function in poor weather conditions such as fog, smog or

smoke. The captured image can be improved.

Select "START" to begin mechanical iris calibration.

Click to reset all camera settings to their default values.

Click to reboot the camera if necessary.