- ページ 5

防犯カメラ Avtech IR Done CameraのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avtech IR Done Camera 8 ページ。 Hd cctv total solution

MOTORIZED PAN AND SEQUENCE SETUP

On the DVR live view, click the channel which connects this camera to display in the full screen mode, and

select

to show the control panel:

NOTE: Not all functions in the panel are supported for this camera. Please see the description below.

Left / Right

Auto mode

Preset point

To pan the camera



Click

to move the camera manually.

To set a sequence group



Step1: Click

Step2: Click

numbering you want to appoint for this point. Then, wait till you see

appearing and disappearing on the DVR status bar.

NOTE: Up to 16 preset points could be configured.

Step3: Repeat Step3 until you've added all the points you need, or click

panel.

Step4: In the "Goto" panel, select the numbering you've appointed for the preset points to check if

they're working properly.

Click to move your selection up / down / left / right, or change settings.

Click to activate the auto function.

Before using it, you need to assign a specific function that will be enabled

when "

PTZ camera.

Click to enter the PTZ preset point you want to see.

to display the preset point panel, and click

to move to the point you want to configure as a preset point, and click the

" is clicked. For details, please refer to the user manual of the

to go to the setting panel.

(command sending)

to return to the "Goto"