Option
Description
•
•
USB Wake
Allows you to enable USB devices to wake the system from Standby.
Support
•
Default setting: The option is enabled..
Wake on LAN/
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
WLAN
LAN signal.
•
•
•
•
•
Block Sleep
This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
POST Behavior screen options
Option
Description
Numlock LED
This option specifies whether the NumLock LED should be on when the system boots.
•
Keyboard Errors
This option option specifies whether the keyboard related errors are reported when it boots.
•
Fastboot
Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•
•
•
Extend BIOS
This option created an additional pre-boot delay.
POST Time
•
•
•
Full Screen Logo
. This option displays full screen logo if your image match screen resolution. The option Enable Full Screen Logo is
not selected by default.
Warnings and
•
Errors
•
•
Virtualization support screen options
Option
Description
Virtualization
Allows you to enable or disable the Intel Virtualization Technology.
20
System setup
Enabled in S5 only
Enabled in S4 and S5
NOTE:
This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
Enable USB Wake Support
Disabled: This option is enabled by default.
LAN Only
WLAN Only
LAN or WLAN
LAN with PXE Boot
Enable Numlock LED: The option is enabled.
Enables Keyboard Error Detection: The option is enabled by default.
Minimal
Thorough (default)
Auto
0 seconds (default)
5 seconds
10 seconds
Prompt on Warnings and Errors (default)
Continue on Warnings
Continue on Warnings and Errors
ページを印刷する